Organization: MCAA

Find the Latest from BuildOps and Galloup Company in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

BuildOps
BuildOps is the only all-in-one operational platform built specifically for the modern commercial contractor, combining service and projects under one roof.


Galloup Company

Galloup is a premier industrial distributor of pipe, valves and fittings, dedicated to service and support. Serving Michigan, Indiana and Ohio with nine facilities, including two distribution centers.

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

MCAA and the UA Issue Message Supporting COVID Vaccination

MCAA President Armand Kilijian and UA General President Mark McManus issued a message highlighting the importance of the COVID vaccine to protect not only ourselves and our families, but our jobsites, our fellow members and contractors, and our end users.

CRW Mechanical Wins Bid with Labor-Saving Milwaukee Press Tool

CRW Mechanical won the bid for a parking garage’s gas piping project by switching to a Milwaukee® M18™ Force Logic™ Long Throw Press Tool rather than using a traditional all-weld approach. The Press Tool saved CRW Mechanical 15 percent on the project’s labor costs, and the crew saved 125 hours—all with just one Long Throw Press Tool onsite.

LEARN MORE

Looking for More Smart Solutions?

Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.

Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.

VISIT SMART SOLUTIONS

Resource Highlight: MCAA’s Scaffold Safety Training Video & Accompanying Materials

Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on MCAA’s Scaffold Safety Training Video and its materials. This video will teach your workers to protect themselves from the hazards inherent in working at heights on both mobile and stationary frame scaffolding.

Your workers will learn about:

  • Scaffold setup
  • Scaffold height and capacity limitations
  • Safe access
  • Fall prevention and protection
  • Safe work practices

The video comes with a pocket guide that highlights key training points, a training documentation sheet, a 20-question multiple choice test, and a test answer key.

Download the Video and Accompanying Materials

Video | Pocket Guide | Documentation Sheet | Test | Answer Key

Have Questions or Need Personal Assistance?

Contact MCAA’s Raffi Elchemmas.

MCAA/CNA MICROLEARNING SAFETY VIDEO SERIES: Proper Material Staging

Last week the MCAA announced the launch of the NEW MCAA/CNA Microlearning Safety Video Series. Together with our partners in safety, CNA, we developed a series of easy-to-watch safety videos that are under 3-minutes! Last week we highlighted Safe Lifting Techniques and each week, for the next three weeks, we will highlight the following videos: Proper Materials Staging, Personal Health, Distracted Driving.

Please enjoy our second microlearning on Proper Material Staging to Help Prevent Musculoskeletal Injuries.

VIEW RESOURCE

Find the Latest from Lochinvar, LLC and Seton in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

Lochinvar, LLC
Setup and service are a snap for contractors thanks to KNIGHT’s SMART SYSTEM. Ensuring comfort and efficiency for your customers is our first priority!

Seton - MCAA Virtual Trade Show


Seton

Since 1956, we’ve been providing contractors with quality service and products designed to meet your critical project requirements. Our complimentary services allow you to free up resources to work on other critical aspects of the project.

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

Victaulic and Current Mechanical Achieve Perfect Harmony on Ambitious Expansion Project

For a demanding new warehouse project with a nine-month timeline, Current Mechanical counted on Victaulic’s experienced virtual design and construction (VDC) team, fabrication services, and grooved mechanical couplings to save installation time even as its workforce was stretched thin. “With the labor shortage, I am not sure we would have been able to complete this project without using Victaulic’s fabrication services,” said Steve Lewis, project manager at Current Mechanical.

LEARN MORE

Looking for More Smart Solutions?

Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.

Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.

VISIT SMART SOLUTIONS

Resource Highlight: PCA’s Pre-Fabrication Operations Guide for Plumbing

Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on PCA’s Pre-Fabrication Operations Guide for Plumbing. This guide provides insight to help plumbing contractors build their fabrication capabilities. It also includes ideas and processes established fabricators can benchmark against.

The guide introduces the pre-fabrication concept and highlights the various aspects of implementing or fine-tuning fabrication operations:

  • Company Culture
  • Personnel
  • Productivity
  • Tools
  • Processes
  • Design
  • Technology
  • Shipping, Portability and the Yellow Label Agreement Supplemental Designs

Find the full range of plumbing-related resources in the PCA Resource Center, where you can use the blue Find A Resource bar to pinpoint exactly what you’re looking for.

Have Questions or Need Personal Assistance?

Contact MCAA/PCA’s Sean McGuire.

MCAA/CNA MICROLEARNING SAFETY VIDEO SERIES: Safe Lifting Technique to Help Prevent Musculoskeletal Injuries

MCAA is pleased to announce the launch of the NEW MCAA/CNA Microlearning Safety Video Series. Together with our partners in safety, CNA, we developed a series of easy-to-watch safety videos that are under 3-minutes long! Each week, for the next four weeks, we will highlight the following videos: 1. Safe Lifting Technique 2. Proper Materials Staging 3. Personal Health 4. Distracted Driving.

Please enjoy our first microlearning video on Safe Lifting Technique to Help Prevent Musculoskeletal Injuries.

VIEW RESOURCE

Connect With the Latest Training from SLOAN and Victaulic at MCAA.org

The Manufacturer/Supplier Training area of MCAA’s website connects our contractor members with training opportunities available from the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new webinars and training opportunities across their product lines, services, solutions or web pages. Here are just a few of the recent additions:

SLOAN
Sloan touch-free sensor faucets, flushometers, soap dispensers and hand dryers communicate their status in many different ways. Learn all about Sloan sensors and what those blinking restroom lights mean.

Victaulic
From one-hour seminars to full-day events, Victaulic University Continuing Education courses provide training on key industry concepts, including piping movement design, grooving and installation fundamentals, and gasket technology, as well as Victaulic HVAC and fire protection solutions. Request an instructor-led course or enroll in an online course today!

Interested in More Training from Our Supplier Partners?

Be sure to visit the Manufacturer/Supplier Training area for all the latest offerings.

Find the Latest from Ridge Tool Company and Sioux Chief Manufacturing Company, Inc. in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

RIDGID K9-306 with Flag

Ridge Tool Company
The RIDGID® K9-306 FlexShaft™ Drain Cleaning Machine, utilizing a full suite of specialized chain knocker accessories, quickly delivers wall-to-wall clean in 3 to 6-inch drain lines up to 125 feet.


Sioux Chief Manufacturing Company, Inc.

The FinishLine is a complete drain and cleanout system that is adjustable before and after the pour. The FinishLine is complemented by Sioux Chief’s full offering of commercial drainage products for all types and sizes of projects. Specified by engineers and installed by contractors across the country. Why use anything else?

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

McKinstry Specifies Uponor Products to Save Energy and Installation Time

Following an energy audit, McKinstry specified Uponor’s flexible Ecoflex preinsulated piping to resolve a remote Minnesota school’s longtime heating problems and save the school thousands in energy costs. Ecoflex proved easy to install, allowing workers to lay hundreds of feet of piping in just one week.

LEARN MORE

Looking for More Smart Solutions?

Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.

Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.

VISIT SMART SOLUTIONS

UPDATED Inspection Section for Aerial Lift Safety Training Video

MCAA has revised the inspection section of the Aerial Lift Safety Training Video to include pre-use inspection testing tilt sensors and pothole protectors on boom and scissors lifts. The video teaches viewers how to protect themselves while working with aerial lifts, including topics such as load capacities, inspection, function testing, what to do in case of a problem, fall prevention & protection, and safe operating procedures.

The revised video comes with a pocket guide that highlights key training points, training documentation sheet, 20-question multiple choice test, and test answer key shown below.

VIDEO

POCKET GUIDE

DOCUMENTATION SHEET

TEST

ANSWER KEY

For coverage of other safety topics critical to our industry, including training videos and materials, visit the Direct Links to MCAA & MSCA Safety Resources page.

Have Questions or Need Personal Assistance?

Contact MCAA’s Raffi Elchemmas

MCAA Launches Revamped Resource Center

MCAA has launched a new and improved resource center to better serve you, our members.

We understand your time is valuable and there is an overwhelming amount of information out there. So, we have streamlined our resource center to help our members find trusted information and tools, easier and faster. Our resources are developed by contractors for contractors who understand your unique needs.

Next steps:

  1. Visit mcaa.org
  2. Use the form on our homepage to find the specific solution to your challenge and advance your business. Narrow down your results by either your role, topic of interest, company size, resource type, or keyword.
  3. Build your pipeline for success

We welcome your feedback. Please contact us at help@mcaa.org with your questions, comments and suggestions.

MCAA President Armand Kilijian Addressed the UA Convention

MCAA President Armand Kilijian had the honor of addressing the United Association (UA)’s 40th General Convention this week is San Diego. Armand was greeted by fully vaccinated delegates and a standing ovation as he highlighted the importance of the UA and MCAA relationship, saying “We could not be as successful as individual contractors without our UA labor partners… and trust me when I say that each of us knows that.” 

His remarks are reprinted here for the benefit of those who missed the convention. 


It is wonderful to be here in San Diego and especially an honor to join the United Association this week. 

My name is Armand Kilijian, and I am the President of the Mechanical Contractors Association of America.  

What a great Convention this has been so far – Congratulations to Mark McManus, Pat Kellett, Mike Pleasant, and the entire team for putting together a fantastic week. 

And to General President McManus, congratulations on your uncontested re-election! 

I started my career some 30 plus years ago at Johnson Controls. I was then fortunate to land a job with O’Brien Mechanical in San Francisco, a full-service plumbing, piping, and HVAC contractor. I have been there for 23 years. 

I have to say that through that journey I have learned quite a lot about what the United Association stands for. I learned about pneumatic piping, boilers, chillers, cooling towers and pumps, refrigerant piping, steam and water piping, waste and vent piping, sprinkler piping, and everything else that goes with what you all represent. But I also learned about the pride that you all have in the work that you perform. The pride of the skilled workers and markets that you all represent. The pride of building the infrastructure that enables this country to remain as great as it is. 

In the Bay Area where I am from, we are privileged to have several UA locals that encompass the area. UA Locals 467, 342, 159, 447, 393, and that’s just encompasses the coverage 50 miles from my office. 

My home local is UA Local 38. Under the leadership of Business Manager Larry Mazzola Jr, and through all of their business agents, organizers, and officers, I have had the pleasure of seeing first-hand what they do on a daily basis to keep their plumbers and pipefitters organized, trained, and ready for work, how they work with the local, state, and national government agencies and representatives to keep projects union, and how they work with the MCAA contractors to get the work, and keep the city alive with construction. For that I thank you for the hard work that you all do daily in your local areas. 

I just have to say how nice it is to be here in person with all of you. After the year and a half we’ve all had, on behalf of the MCAA, I also want to thank all our partners at the UA.  

Thank you for your vision and leadership every day, but especially through one of the toughest times we’ve experienced as an industry.  

It is because of the United Association’s 360,000 members getting up every day and performing jobs in tough circumstances, that we, and millions of Americans can continue with our daily lives. What you all did, continuing to work through a global health crisis, was important—and remarkable. We’ve said it many times before, and I want to emphasize this: We have the best trained work force, working on the front lines every day, as essential employees—and you kept this economy going. I, personally, thank you for that.  

Our industry did not skip a beat. You are as your theme for this convention states “Built of Excellence – Always Essential” 

We talk a lot about family—and how the UA and MCAA work so closely together. And this past year and a half, we have relied on that relationship—we have strengthened our partnership. And we are all stronger for it.  

Through open dialogue and in complete solidarity, labor and management worked together to solve unprecedented challenges like never before. And I am extremely proud of that. The value of unionized construction is now on full display. 

This partnership is crucial to MCAA. With your skills and dedication, we are able to meet our customers increasingly demanding needs and propel our businesses forward.  

We could not be as successful as individual contractors without our UA labor partners… and trust me when I say that each of us knows that. 

I’ve always valued this Convention because it’s a great opportunity for MCAA to hear about your issues… to better understand your challenges… so that we can strengthen both our organizations.  

Together, we are focused on several initiatives to address those challenges and advance the industry.  

For years, the UA and MCAA have worked in concert to make sure your voices are heard on Capitol Hill. We have faced key challenges head on to protect your livelihood and set the stage for an even brighter future.  

As you all know, the pace of change is increasing exponentially. If anything, the COVID-19 pandemic has accelerated it. That’s why we’re working together to keep UA and MCAA members ahead of the curve. You’ve trained to use new technologies as MCAA member companies continue to modernize at an astonishing rate. By exploring new technology and adopting what works best, we are now running safer, more productive jobsites.  

We are working together to find new avenues to increase market share. Local MCA Chapters along with the UA Locals in the area are meeting regularly to open up new doors of opportunity – benefitting everyone involved. 

We are coordinating new jointly developed programs to train field leaders with what it takes to take on projects in this new day and age. These programs aren’t just for the established journeymen and foremen, but also for apprentices wanting to lead their brothers and sisters one day in the field. 

We are establishing joint national marketing strategies in order to increase the UA membership numbers across Canada and the United States. The future of the UA strength is in your membership. The future success of the MCAA Contractors is with the UA.  

We’re looking forward to the continued return of our in-person meetings. That is where the partnership really takes root. We need to be together, to shake hands and give each other a hug, to remind ourselves that is the people that make our industry great.  

These past 17 months have tested our industry, our partnership, and each of us individually. It’s been tough, but I am thrilled to say we are in a great place. And there are so many opportunities on the horizon when we continue to innovate and work together. There truly is no challenge that the UA/MCAA cannot face and overcome together. 

“Built on Excellence – Always Essential” 

Let’s make the next five years the best that we can. I appreciate your time today and value your partnership. Thank you. 

Resource Highlight: NCPWB’s Welding Talks

Each week, MCAA will highlight one or more of the educational resources that are free to MCAA members as a benefit of membership. This week, we focus on NCPWB’s Welding Talks, a series of 25 short talks that teach your welders to protect themselves from common welding safety hazards, including grinding, respiratory protection, electrical safety and more.

Find the full range of welding-related resources in the NCPWB Resource Center, where you can use the blue Find A Resource bar to pinpoint exactly what you’re looking for.

Have Questions or Need Personal Assistance?

Contact MCAA/NCPWB’s Nick Nikpourfard.

MCAA’s 2021-2022 Named Scholarship Applications Are Available Now

Scholarship and Award applications are online now. Take advantage and apply for these recognitions!

There are several short essay questions you will need to answer when filling out your application. You will not be able to save your application and return to complete at a later time. So, be sure to review the short essay questions below before beginning to fill out your application.

Are you applying for a Women in the Mechanical Industry Scholarship?

This year, it includes a video submission! MCAA’s WiMI Committee would like to get to know you better and requests you apply via a video submission! Have fun creating a short video telling us a little bit about yourself, professionally and personally.


*You will need to upload your video before submitting your final application for all MCAA 2021-2022 Named Scholarships.

Scan the QR codes or click the links below to learn more!