Archives: News Items

Find the Latest from Trane and Morris Group International in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

Trane
Two lines. Less copper. Indoor composite water piping can reduce cost & complexity.

Learn More

Morris Group International
The ConTrols® Hi-Low Master Mixing Valve mixes hot water from the heater with cold water to the right temperature for the distribution system. ConTrols is a member of Morris Group International.

Learn More

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Visit the Virtual Trade Show

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

Visit Smart Solutions

Get Ready to Meet Your Next Intern or New Hire at MCAA24!

Around 150 students from 28 MCAA student chapters are registered for MCAA24. They will soon be scoping out MCAA’s GreatFutures Job Board for companies they would like to meet with in Orlando to discuss internships and entry-level, full-time positions. Post your job today and be sure to stop by the ‘Hire Me’ Job Fair in the foyer outside the Manufacturer/Supplier Council Exhibit on Tuesday, March 19th to meet with potential candidates in person. 

Students seeking employment opportunities will be stationed at tables based on where they would like to find work, not necessarily where they’re located now. Tables will be separated geographically into West, Central and East. Stop by the table that best fits your company’s location and find your next great hire.

Connection Corner Schedule

Visit the Connection Corner in the Palazzo Ballroom Foyer during Convention breaks for informal networking opportunities.  

  • Monday, March 18  | 7:00 AM – 4:00 PM 
  • Tuesday, March 19 | 10:00 AM – 4:00 PM  

MCAA24 Student Chapters 

The following schools will be represented at MCAA24. Be sure to check out the “We’re Here Banner” in the Connection Corner for the most up to date listing of schools as they arrive on site.  

  • Auburn University
  • Ball State University 
  • Binghamton University
  • Bradley University
  • California Polytechnic State University, San Luis Obispo
  • California State University, Chico
  • California State University, East Bay
  • California State University, Sacramento 
  • Fairleigh Dickinson University 
  • Ferris State University
  • Illinois State University 
  • Indiana State University 
  • Iowa State University 
  • Kansas State University 
  • Kent State University 
  • McMaster University 
  • Missouri State University 
  • Oregon State University 
  • Pittsburg State University 
  • Purdue University 
  • Southern Illinois University Edwardsville 
  • University of Maryland, College Park 
  • University of Nebraska 
  • University of Southern California 
  • University of Washington 
  • University of Wisconsin-Stout
  • Virginia Tech 
  • Washington State University 
REGISTER FOR MCAA24

How to Post an Entry-Level Job or Internship 

  • Login with an MCAA username and password
  • Click on the job board within the Career Development page
  • Click Manage My Jobs and Add a Job to create your posting
  • Jobs remain active for 1 month to ensure postings stay fresh
  • When the job is set to expire, a reminder will be sent for you to either “mark as filled” or “duplicate” and repost for another month
  • Interested students can view postings and submit their contact information and resume
  • Your office will be notified via email when interested students submit their resume
  • From there, your office is encouraged to continue with your company’s application and interview process

Hired an Intern?  Submit an Internship Grant 

Already have an intern?  Don’t forget to submit your Intern Grants for 2024!  Part 1 applications are $1,000 for 1 intern or up to $2,000 for 2 or more interns.  Then once you hire an intern full-time, come back and submit Part 2 for a $500 gift card to present to your new hire. 

Part 1:

  • Submit an application for each intern (Interns must be listed on a Part 1 application to be eligible for Part 2)
  • Applications are accepted on a rolling basis
  • Companies with one intern are eligible for a $1,000 grant OR companies with two or more interns may receive a $2,000 grant

Part 1: Internship Grant Application

Part 2:

For companies successfully converting an intern from their Part 1 list to a full-time new hire, a $500 gift card will be mailed to the company to present to their new hire. New hire conversions are unlimited, but the name must be included on a Part 1 list from an MCAA member company.  Submit the form below to notify MCAA of a new hire conversion.
• Part 2 application may not be submitted until after the full-time start date.

Part 2: Internship Grant Application

Pre-IPM Registration Is Open for 2024 Classes Starting May 21st!

Registration for this year’s Pre-IPM classes is open! These introductory-level project management programs begin the week of May 20th, and space is limited. If you have Assistant Project Managers, Project Engineers, new hires, or people transitioning to the office from the field or Estimating, this online course is for them!

MCAA’s newest project management program, the Preparatory Institute for Project Management, was developed by the same team that oversees the Institute for Project Management (IPM) and Advanced Institute for Project Management (AIPM). This course provides an introductory education on everything from planning to scheduling, from cost control to professionalism.

The 12-week online curriculum is intended for those with 0-3 years of experience and is designed to help flatten the learning curve for those new to the world of mechanical project management. In a series of 90-minute weekly classes, professional instructors and current mechanical contractors will explore topics essential to project management.

Registration takes place on a first-come, first-served basis – and classes tend to fill quickly. Visit the Pre-IPM webpage to learn what you need to do to prepare for registration. The Pre-IPM team looks forward to welcoming your participants to the program this spring!

LEARN MORE & REGISTER

Resource Highlight: MCAA’s Things and Must Do’s to Protect/Secure Your Company’s Data

Technology is changing every day, but the need to secure company data remains constant. MCAA’s Things and Must Do’s to Protect/Secure Your Company’s Data reviews the basic steps contractors should take to keep intruders out and company data secure. It’s just one of MCAA’s educational resources that are free to MCAA members as a benefit of membership.

The bulletin explores:

  • Data storage solutions
  • Data security solutions
  • Data protection strategy and policy guidelines
DOWNLOAD

You may also be interested in MCAA’s The Next Generation of Data Security, which provides guidance and insight on current tools and techniques to protect your data and operations.

For a full list of available Management Methods Bulletins, including several on the topic of marketing, visit the Management Methods Bulletins page.

Have Questions or Need Personal Assistance?

Contact MCAA’s Frank Wall.

Robert Beck Explores the Value of Relationships on The People Business Podcast

MCAA President Robert Beck joined Frank Favaro for The People Business podcast on February 22, 2024. Listen as he delves into the significance of continually forging and solidifying relationships. He sheds light on the power of influence and its role in serving the greater good for everyone involved. Amid the earnest conversation, Robert also highlights the importance of infusing fun into all aspects of the day.

Find the Latest from DEWALT Industrial Tool Company and XOi in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

DEWALT Industrial Tool Company
Maximize cutting-speed potential and minimize cutting effort with innovative DEWALT IMPACT CONNECT™ Impact Driver Cutting Attachments. The DEWALT IMPACT CONNECT™ PVC/PEX Pipe Cutter Attachment makes 6X faster cuts and requires 100X less cutting effort than a manual cutter so you can save time on your toughest jobs.

Learn More

XOi
XOi fills the gap in curb-to-curb experience for service teams. As a complete system of visual record and enablement, the cloud-based mobile app documents everything that occurs on the job, allowing service providers to better educate, communicate, and verify the services they offer.

Learn More

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Visit the Virtual Trade Show

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

Visit Smart Solutions

Learn About Breakthroughs in Orbital Welding Technology for Med Gas at NCPWB24

April 21 – 23, 2024 | Scottsdale, Arizona

Get ready for an exhilarating journey into the forefront of welding technology! Join us at the NCPWB Technical Conference/Committee Meeting to learn about breakthroughs in orbital welding technology for med gas. You will experience cutting-edge presentations that delve into the latest innovations and challenges in the welding industry. Don’t miss out…register today!

Orbital Welding Technology for Med Gas is where CSI’s breakthroughs in universal power supply and copper orbital welding machines take center stage. Uncover the struggles and triumphs as they overcome hurdles in temperatures, materials, and code requirements to bring this technology to the commercial market. You will hear directly from Lynne Cooper, Director Orbital Technology Group, and Theodore J. Jones, President of Critical Systems, Inc. (CSI).

Additional sessions will cover:

Adaptive Welding – Case Study and Recent Advancements: Experience a first-of-a-kind welding system designed for spent nuclear fuel encapsulation. Witness the evolution of autonomous technology with minimal operator input, showcasing active path compensation, adaptive welding parameters, and the use of Artificial Intelligence for joint geometry characterization.

Advancements in Pipe Welding: Dive into Miller welding educational resources and the latest in pipe welding technologies. From RMD for root passes to Pulse for fill and cap passes, explore the innovations shaping the future of pipe welding.

Closing the Welder Gap – Education and Automation for Future Success: Addressing the critical shortage of welders, this presentation advocates for a paradigm shift. Embrace education and automation solutions, from Augmented Reality to Cobots and Additive Manufacturing, to secure the industry’s future.

High-Purity Tube Welding: Discover the intricacies of building piping systems that prevent contamination, navigating ASME piping codes, and the ASME BPE Standard. Learn about weld acceptance criteria ensuring the safety of drug products in pharmaceutical systems.

Advances and Challenges in Welding and Additive Manufacturing: Explore recent developments in welding, from pulsed GMAW to laser welding, and delve into the world of additive manufacturing. Uncover the challenges and opportunities presented by demographic trends, diversity, equity, and inclusion.

Welder and Welding Operator Qualification: Delve into the intricacies of qualification tests ensuring welders and operators are prepared for specific job sites. A comparative exploration of various qualification codes promises insights into industry best practices.

Selecting, Adopting, and Submitting NCPWB WPSs: Navigate the extensive world of welding procedure specifications with NCPWB. Gain valuable insights into selecting, adopting, and submitting WPSs and BPSs, ensuring compliance with industry standards.

The committee meeting portion of the event will cover topics such as policy and procedures regarding the joint UA/NCPWB welder certification program and address chapter inquiries. In addition to the annual event, a one-day chapter operations seminar will educate chapter administrators about the policies and procedures associated with maintaining welder qualification records.

Don’t miss the chance to be at the forefront of welding innovation! Join us at the conference for these  groundbreaking presentations and the information you need to stay on top of other welding issues.

LEARN MORE & REGISTER

Fuel Your Success at MCAA24 – Register Now!

MCAA24 is a can’t miss opportunity to prepare your company for the year ahead. Space is running out, register today!

The 2024 MCAA Annual Convention will be held March 17 – 21 at the beautiful JW Marriott and Ritz-Carlton Grande Lakes in Orlando, Florida. Those who attend will enjoy exciting and meaningful general sessions, stimulating education seminars, superior networking opportunities and fun social events for the whole family.

By registering spouses, guests, teens and children, you are unlocking the door to the total convention experience for them, and they are welcome to join MCAA members at all convention events.

Register today to join your MCAA family in Orlando!

CONVENTION WEBSITE

Resource Highlight: MCAA’s Recovery of Material Escalation Costs Arising From Steel and Aluminum Tariffs

Unanticipated price escalations in construction materials after the contract is executed have caused concern to owners and contractors. MCAA’s Recovery of Material Escalation Costs Arising From Steel and Aluminum Tariffs addresses the approaches contractors may assert to recover under fixed priced contracts for the price increases resulting from new tariffs on imported steel and aluminum. It’s just one of MCAA’s educational resources that are free to MCAA members as a benefit of membership.

The bulletin explores:

  • Historic periods of price escalation
  • Challenges of traditional price escalation recovery arguments
  • Tariff-based price increases as additional avenues for recovery
  • Contract clauses for tariffs
DOWNLOAD 
WEBBOOK

You may also be interested in MCAA’s Fixed Price Construction Contracts, Material Price Volatility and Contract Cost Adjustment Clauses, which discusses traditional arguments and approaches that contractors may pursue to recover for market-driven price escalation.

For a full list of available Management Methods Bulletins, including several on the topic of marketing, visit the Management Methods Bulletins page.

Have Questions or Need Personal Assistance?

Contact MCAA’s Frank Wall.

Ryan Hoggatt: MCAA’s MEP Innovator of the Year Is Leading Innovation in Construction

MCAA congratulates Ryan Hoggatt, UMC, Inc.’s Director of Manufacturing, on being our MEP Innovator of the Year. The award recognizes his outstanding contributions to the construction industry in the areas of efficiency, productivity, and innovation. His efforts have improved UMC, Inc.’s operations and encouraged others to adopt innovative practices.

Hoggatt plays a crucial role at UMC, Inc., overseeing areas such as corporate manufacturing, virtual construction, construction technology adoption, prefabrication, and modular construction. His work focuses on making processes more straightforward and efficient, cutting waste, and ensuring high standards of quality and safety.

Beyond his work at UMC, Inc., Hoggatt is known for sharing his insights on innovation with the wider construction community. This commitment to innovation was on display at the 2024 MEP Innovation Conference. During the Dear Software Vendor session, Hoggart and co-presenters Darren Young of UMC and Mark Lotspeich from Dynaletric, shared the contractor perspective on integrating new software tools with both contractors and industry developers.

Looking forward, Hoggatt advocates for collaboration, embracing change, and continuous improvement in the construction industry. His approach serves as an inspiration for future innovation, aiming to make the industry more sustainable and successful.

MCAA congratulates Hoggatt on the award and thanks him for sharing his knowledge with us.

Pre-IPM Registration Now Open for 2024 Classes Starting May 21st!

Registration for this year’s Pre-IPM classes is now open! These introductory-level project management programs begin the week of May 20th, and space is limited. If you have Assistant Project Managers, Project Engineers, new hires, or people transitioning to the office from the field or Estimating, this online course is for them!

MCAA’s newest project management program, the Preparatory Institute for Project Management, was developed by the same team that oversees the Institute for Project Management (IPM) and Advanced Institute for Project Management (AIPM). This course provides an introductory education on everything from planning to scheduling, from cost control to professionalism.

The 12-week online curriculum is intended for those with 0-3 years of experience and is designed to help flatten the learning curve for those new to the world of mechanical project management. In a series of 90-minute weekly classes, professional instructors and current mechanical contractors will explore topics essential to project management.

Registration takes place on a first-come, first-served basis – and classes tend to fill quickly. Visit the Pre-IPM webpage to learn what you need to do to prepare for registration. The Pre-IPM team looks forward to welcoming your participants to the program this spring!

LEARN MORE & REGISTER

MSCA Sales Basecamp Registration is Open – Register Now! 

May 20-21, 2024 | Phoenix, AZ

Sales Basecamp is where it begins for entry-level service sales personnel. In this competitive and uncertain business landscape, the rules of sales and customer engagement have changed. 

Please note: In addition to the in person class May 20-21, 2024, there will be a mandatory virtual session on Thursday, May 9, 2024, at 1pm ET. If you can attend the in person portion, but cannot make the virtual session time, please reach out to Teresa Pezzi for next steps: tpezzi@mcaa.org.

LEARN MORE & REGISTER

Connect With the Latest Training from Victaulic and Watts Water Technologies at MCAA.org

The Manufacturer/Supplier Training area of MCAA’s website connects our contractor members with training opportunities available from the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new webinars and training opportunities across their product lines, services, solutions or web pages. Here are just a few of the recent additions:

Victaulic
From one-hour seminars to full-day events, Victaulic University Continuing Education courses provide training on key industry concepts, including piping movement design, grooving and installation fundamentals, and gasket technology, as well as Victaulic HVAC and fire protection solutions. Request an instructor-led course or enroll in an online course today!

Learn More

Watts Water Technologies
Watts eLearning system provides access to a wide selection of products and solutions from our family of brands. Courses can be accessed anytime, anywhere; perfect for your busy schedule!

Learn More

Interested in More Training from Our Supplier Partners?

Be sure to visit the Manufacturer/Supplier Training area for all the latest offerings.

Learn More

Learn How to Deliver an Outstanding Customer Experience from NEI Instructor Frank Favaro

MCAA’s National Education Initiative (NEI) Seminars bring our best programs to your local association or your company thanks to instructors like Frank Favaro, founder and President of ServeCentric Coaching in Cleveland, OH. Frank teaches sales employees where other companies drop the ball when it comes to customer interactions, relationships, and service and how to avoid those same mistakes.

Frank is the first certified CX (customer experience) Coach specializing in our industry. He is licensed and trained by the world’s customer service authority, The DiJulius Group and John DiJulius. He is also a master coach in the Go-Giver Methodology, licensed by Hall of Fame speaker and author Bob Burg to teach the 5 Laws of Stratospheric Success. 

Frank believes the best sales and marketing strategy is a great customer experience based on authentic relationships.

His coaching track record and his experience as one of the mechanical service industry’s top account executives make him a natural fit to teach the Customer Experience Seminars (CES). Designed for sales employees, these seminars focus on customer interactions, relationships, and service. Those who attend will learn where other companies drop the ball, and how to avoid those same mistakes.

Like our other NEI instructors, Frank brings his unique blend of industry and teaching experience to virtual courses, a relatively new NEI offering. Providing top notch, accessible education for everyone in your organization is what the MCAA’s NEI is all about! Visit the NEI website for more information about these seminars and a full list of the NEI courses available to MCAA members.

Book your courses via the NEI website, then apply for a 20% rebate on the instructor fees, up to $5,000 per class.*

LEARN MORE ABOUT FRANK’S CLASSES
NEI WEBSITE

*This benefit is available only to MCAA members and local affiliates in good standing who book courses via the NEI website. Learn more about the rebate program here. Have questions or need personal assistance? Contact MCAA’s Frank Wall or call him at 301-990-2215.

Find the Latest from Morris Group International and SLOAN in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

Morris Group International
Morris Group International’s Kwik Ship® Brand includes the Golden Triangle: three manufacturing plants replenish local stock weekly, ensuring many products are available for immediate shipment.

Learn More

SLOAN
Airports, schools, and eldercare facilities often need commercial restroom faucets that go beyond handwashing. Sloan’s NSF-61 certified faucets guarantee safe drinking water flows out of our most popular faucet designs.

Learn More

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Visit the Virtual Trade Show

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

Visit Smart Solutions

CNA Shares Tips to Minimize Winter Driving Risks

Operating a vehicle in any weather condition involves a variety of risks. Winter weather requires extra care and attention to minimize risk to both companies and drivers. CNA, an MCAA member and longtime supporter of MCAA’s Safety Excellence Initiative, shares tips to minimize risk and keep everyone safe on the road.

The Winter Driving Guide prepares companies to manage driving operations based on the National Weather Service categories for winter weather risks.

DOWNLOAD

The Driver: Tips for Wintertime Driving teaches drivers to handle winter driving hazards to so they arrive safety at their destinations.

DOWNLOAD

MCAA thanks CNA for sharing these resources, and for their commitment to our members’ safety.

2024 MEP Innovation Conference Expanded Relationships & Skills

Over the last four years, the MEP Innovation Conference’s success and popularity have continued to skyrocket. The 2024 conference drew record-breaking attendance, with more than 725 participants in attendance. Together, MCAA, NECA (National Electrical Contractors Association), and SMACNA (the Sheet Metal and Air Conditioning Contractors’ National Association) have grown this meeting into one of the premier construction events of the year.

Innovators and industry pioneers from all three associations expanded their comprehension, relationships and skills across all building trades during the January 29–31 gathering in Orlando, Florida. As it does each year, the conference helped registrants better understand new technologies and project trends as well as develop collaboration opportunities.

Attendee demographics are shifting. A live survey revealed that more than half of the attendees were either company executives or department heads. This is a shift from the conference origins when attendees were primarily working within BIM and VDC. 

“This year, I’ve noticed an increase in leadership representation at the conference,” remarked Chris Weaver, Director of Technology at Andy J. Egan. “This trend reflects both the growing recognition among executives of technology’s pivotal role in business success and the promotion of individuals spearheading technology implementation within their organizations.”

With over 50 educational sessions, all based upon contractor case studies, the conference provides a heavy dose of practical innovation. The breakout sessions proved to be the real work horse of the sessions. Over 70 speakers from the three trades shared their wins and losses when it comes to software, technology, processes, and hardware. 

Plans are already underway for the 2025 conference, to be held January 27-29 in Los Angeles, California. Watch for more information and resources as the date draws nearer.

Journey into the Forefront of Welding at NCPWB24

April 21 – 23, 2024 | Scottsdale, Arizona

Get ready for an exhilarating journey into the forefront of welding technology! Join us at the NCPWB Technical Conference/Committee Meeting for a showcase of cutting-edge presentations that delve into the latest innovations and challenges in the welding industry. Register today!

Topics to be covered include:

Orbital Welding Technology for Med Gas: CSI’s breakthroughs in universal power supply and copper orbital welding machines take center stage. Uncover the struggles and triumphs as they overcome hurdles in temperatures, materials, and code requirements to bring this technology to the commercial market.

Adaptive Welding – Case Study and Recent Advancements: Experience a first-of-a-kind welding system designed for spent nuclear fuel encapsulation. Witness the evolution of autonomous technology with minimal operator input, showcasing active path compensation, adaptive welding parameters, and the use of Artificial Intelligence for joint geometry characterization.

Advancements in Pipe Welding: Dive into Miller welding educational resources and the latest in pipe welding technologies. From RMD for root passes to Pulse for fill and cap passes, explore the innovations shaping the future of pipe welding.

Closing the Welder Gap – Education and Automation for Future Success: Addressing the critical shortage of welders, this presentation advocates for a paradigm shift. Embrace education and automation solutions, from Augmented Reality to Cobots and Additive Manufacturing, to secure the industry’s future.

High-Purity Tube Welding: Discover the intricacies of building piping systems that prevent contamination, navigating ASME piping codes, and the ASME BPE Standard. Learn about weld acceptance criteria ensuring the safety of drug products in pharmaceutical systems.

Advances and Challenges in Welding and Additive Manufacturing: Explore recent developments in welding, from pulsed GMAW to laser welding, and delve into the world of additive manufacturing. Uncover the challenges and opportunities presented by demographic trends, diversity, equity, and inclusion.

Welder and Welding Operator Qualification: Delve into the intricacies of qualification tests ensuring welders and operators are prepared for specific job sites. A comparative exploration of various qualification codes promises insights into industry best practices.

Selecting, Adopting, and Submitting NCPWB WPSs: Navigate the extensive world of welding procedure specifications with NCPWB. Gain valuable insights into selecting, adopting, and submitting WPSs and BPSs, ensuring compliance with industry standards.

The committee meeting portion of the event will cover topics such as policy and procedures regarding the joint UA/NCPWB welder certification program and address chapter inquiries. In addition to the annual event, a one-day chapter operations seminar will educate chapter administrators about the policies and procedures associated with maintaining welder qualification records.

Don’t miss the chance to be at the forefront of welding innovation! Join us at the conference for these  groundbreaking presentations and the information you need to stay on top of other welding issues.

Learn More & Register

Resource Highlight: MCAA’s Design-Assist

On a Design-Assist project, specialty contractors participate in a project’s design. They can provide input that maximizes system efficiencies, reduces costs, and potentially limits design errors or omissions. While the process has many benefits, it also presents risks that are not inherent in other forms of delivery. MCAA’s Design-Assist Management Methods bulletin offers tips for mitigating those risks. It’s just one of MCAA’s educational resources that are free to MCAA members as a benefit of membership.

The bulletin includes:

  • An introduction to design-assist
  • The role of a design-assist contractor
  • Why a design-assist project is potentially riskier than a design-bid-build (DBB) project
  • How design-assist affects the Spearin Doctrine
  • Takeaways from Coughlin
  • Risk management recommendations for contractors
  • Contract forms addressing design-assist obligations
DOWNLOAD

For a full list of available Management Methods Bulletins, visit the Management Methods Bulletins page.

Find all of MCAA’s educational resources in the Resource Center.

Have Questions or Need Personal Assistance?

Contact MCAA’s Frank Wall.

Find the Latest from EVAPCO, Inc. and Carrier Corporation in MCAA’s Virtual Trade Show

MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.

Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:

EVAPCO, Inc.
Using the power of capacitive deionization technology, EVAPCO Water Saver makes it easy to improve your water efficiency, lower your operating costs, and deliver a recovery rate of up to 90 percent. EVAPCO even manages the system’s routine monitoring for you.

Learn More

Carrier Corporation
Carrier’s new Ecoblue technology is the industry’s first beltless direct-drive vane axial fan system for select rooftop models designed to improve performance and efficiencies while decreasing maintenance and installation costs.

Learn More

Need Something Else?

Find many more smart solutions in MCAA’s Virtual Trade Show!

Visit the Virtual Trade Show

Speaking of Smart Solutions

Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.

This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!

Visit Smart Solutions